VS-88H2A – Operating VS-88H2A via Front Panel Buttons
Routing HDMI Audio Output Signals to HDMI Input Ports
To route an HDMI audio output to HDMI input ports, enable ARC on the HDMI output ports
and then route them.
To set an HDMI output to ARC mode:
ARC can be enabled or disabled at any time, regardless of whether a display is connected
to the HDMI output or not.
1. Press and hold MUTE/PATTERN and ALL simultaneously until both buttons illuminate
and the device enters ARC mode:
On the front panel button:
• A flashing output button means that the audio of that output is set to ARC mode.
• An illuminated Output button means that the output is not in ARC mode.
2. Press one or more output buttons:
▪ If the selected button flashes, that output to set to ARC mode.
▪ If the selected button stops flashing, ARC mode is disabled for that output.
The LOCK button flashes.
3. Press LOCK to save changes.
The LOCK button flashes until the changes are saved. The device exits the ARC mode
and returns to Video switching mode.
The ARC can be routed to HDMI inputs and to any of the balanced audio outputs.
HDMI output is set to ARC mode.
To Next Page
Loading...
