Viewing and Adjusting Output Settings
View and adjust the settings for each VS-88H2A output.
Figure 14: Switching Page – Output Button
Each output button displays the:
▪ HDCP status – output supports HDCP ( ) or does not support HDCP ( ).
▪ HDCP out – follow input HDCP ( ), support HDCP 1.4 ( ) or HDCP 2.2 ( ).
▪ View the input switched to the output (for example, 2).
▪ Switching speed – normal ( ), fast ( ) or extra-fast ( ).
▪ Output status – an acceptor is connected ( ) or not connected ( ) to the output.
To adjust the output settings:
1. In the Navigation pane, click Switching. The Switching page appears.
2. Select the AFV tab.
The adjustment sequence presented here is only an example. You can adjust the output
settings in any other order.
3. Click . The output settings window appears:
Figure 15: Switching Page – Editing the Output Button Settings
To Next Page
Loading...
