Switching Audio in Breakaway Mode
In breakaway mode, the HDMI embedded audio is switched separately from the video signal.
Set the volume and balance of each analog output using the appropriate sliders or
mute/unmute the audio signal of an output:
Figure 22: Switching Page – Switching Audio in the Breakaway Mode
You can switch a digital input to a digital or analog output and an analog input to a digital or
analog output. If ARC mode is enabled, you can switch a selected ARC to any of the analog
outputs.
To switch an audio input to an audio output:
1. In the Navigation pane, click Switching. The Switching page appears.
2. Select Audio break away tab.
3. Switch an input to a selected output. For example, switch digital input 6 to analog
output 2:
▪ Click an HDMI or Analog button (under the Audio Outputs column).
The selected button turns purple with a black frame .
▪ Click a Digital or Analog button (under the Inputs column).
The selected button turns purple with a blue frame .
Analog Output 3 is switched to D6 .
To Next Page
Loading...
