Kramer VS-88H2A

Kramer Electronics Ltd.
VS-88H2A – Using Embedded Web Pages
52
Reading Default EDID
To read the EDID from the default EDID:
1. In the Navigation pane, click EDID Management. The EDID Management page
appears.
2. Click DEFAULT.
3. Click COPY.
The EDID message appears.
Figure 51: EDID Page –EDID Copy Message
4. Click OK. The following message appears:
Figure 52: EDID Management Page – Loading the EDID from Output to Input
5. Click OK.
6. EDID is copied from a selected, connected output to the selected inputs.
Reading EDID from an Input
To read the EDID from an input to another input/s:
1. In the Navigation pane, click EDID Management. The EDID Management page
appears.
2. Select an input from the list (on the left).