5-20 Issue 05, 01/01 Krautkramer DM4E / DM4 / DM4 DL
Operation Activating and deactivating functions
Operation:
Selecting the configuration level
The instrument is switched off.
– Switch on the instrument with c and keep c
pressed.
– As soon as an indication appears additionally press
d. Keep both keys pressed for about 3 seconds.
After switching on, the normal displays appear.
After this, the instrument switches into the function
first activated/deactivated (independent of which func-
tion was last selected: basic setting: 2-PT).
Selecting functions
– Press u or d until the required function is
displayed.
Function activation/deactivation
When the function is displayed which you wish to acti-
vate or deactivate:
– Press c.
The active setting is displayed:
• ON = Function is activated.
• OFF = Function is deactivated.
– Press u or d, in order to change the setting as
required.
– Acknowledge with c.
The function which you have activated or deactivated
is displayed again.
– Carry out the same steps for all functions whose
setting you want to change.
– After this press m.
The instrument switches into the Standard mode.
All activated modes are indicated on the display.
H Note:
When functions are deactivated they are reset to their
basic setting.
5-20 Issue 05, 01/01 Krautkramer DM4E / DM4 / DM4 DL
Operation Activating and deactivating functions
Operation:
Selecting the configuration level
The instrument is switched off.
– Switch on the instrument with c and keep c
pressed.
– As soon as an indication appears additionally press
d. Keep both keys pressed for about 3 seconds.
After switching on, the normal displays appear.
After this, the instrument switches into the function
first activated/deactivated (independent of which func-
tion was last selected: basic setting: 2-PT).
Selecting functions
– Press u or d until the required function is
displayed.
Function activation/deactivation
When the function is displayed which you wish to acti-
vate or deactivate:
– Press c.
The active setting is displayed:
• ON = Function is activated.
• OFF = Function is deactivated.
– Press u or d, in order to change the setting as
required.
– Acknowledge with c.
The function which you have activated or deactivated
is displayed again.
– Carry out the same steps for all functions whose
setting you want to change.
– After this press m.
The instrument switches into the Standard mode.
All activated modes are indicated on the display.
H Note:
When functions are deactivated they are reset to their
basic setting.
To Next Page
Loading...
