Krautkramer DM4E - Selection of File Header Printout; Selection of Statistics Printout

Krautkramer DM4E / DM4 / DM4 DL Issue 05, 01/01 7-5
Printing data Documenting measurement values (DM4 DL only)
Selection of file header printout
You can determine whether a file header with general
data be printed or not.
Operation:
– Press m until SPEC is displayed.
– Press u or d until HEAD is displayed.
– Press c.
The active setting is displayed.
– Select the required setting with u or d:
ON Printout of file header
OFF No printout of file header
– Acknowledge with c.
You remain in the SPEC menu.
Selection of statistics printout
You can select whether the report printout contains
statistical data or not.
Operation:
– Press m until SPEC is displayed.
– Press u or d until STAT is displayed.
– Press c.
The active setting is displayed.
– Select the required setting with u or d:
ON Printout of statistical data
OFF No printout of statistical data
– Acknowledge with c.
You remain in the SPEC menu.
Krautkramer DM4E / DM4 / DM4 DL Issue 05, 01/01 7-5
Printing data Documenting measurement values (DM4 DL only)
Selection of file header printout
You can determine whether a file header with general
data be printed or not.
Operation:
– Press m until SPEC is displayed.
– Press u or d until HEAD is displayed.
– Press c.
The active setting is displayed.
– Select the required setting with u or d:
ON Printout of file header
OFF No printout of file header
– Acknowledge with c.
You remain in the SPEC menu.
Selection of statistics printout
You can select whether the report printout contains
statistical data or not.
Operation:
– Press m until SPEC is displayed.
– Press u or d until STAT is displayed.
– Press c.
The active setting is displayed.
– Select the required setting with u or d:
ON Printout of statistical data
OFF No printout of statistical data
– Acknowledge with c.
You remain in the SPEC menu.