6-10 Issue 05, 01/01 Krautkramer DM4E / DM4 / DM4 DL
Operation of the Data Logger (DM4 DL only) Viewing stored measurement values
– Press u or d in order to view other memory
locations.
In doing this, the following indications can appear:
No measurement value is stored in this memory posi-
tion (is already indicated by the minus sign at the
memory location number).
The flashing minus sign indicates an under lower
alarm limit condition. A plus sign would therefore indi-
cate an over upper alarm limit condition.
Memory location is inhibited (refer to Page 6-8).
– Press m again in order to exit the measurement
value display.
The instrument is again ready for measurement.
6-10 Issue 05, 01/01 Krautkramer DM4E / DM4 / DM4 DL
Operation of the Data Logger (DM4 DL only) Viewing stored measurement values
– Press u or d in order to view other memory
locations.
In doing this, the following indications can appear:
No measurement value is stored in this memory posi-
tion (is already indicated by the minus sign at the
memory location number).
The flashing minus sign indicates an under lower
alarm limit condition. A plus sign would therefore indi-
cate an over upper alarm limit condition.
Memory location is inhibited (refer to Page 6-8).
– Press m again in order to exit the measurement
value display.
The instrument is again ready for measurement.
To Next Page
Loading...
