Krautkramer DM4E - Page 79

Krautkramer DM4E / DM4 / DM4 DL Issue 05, 01/01 7-9
Transferring data to a PC Documenting measurement values (DM4 DL only)
H Note:
If you wish to transfer all measurement sets at once,
select F.ALL.
– Press s.
The selected data are transferred to the PC.
– Press f.
You arrive back into the DM4 DLs active operation
mode.
H Note:
Empty memory locations and empty measurement
sets are not transferred.
The data is now available as ASCII files on your PC
and can be further processed.
Transferring individual measurement values
When a PC is connected you are able to directly trans-
fer a displayed measurement value by pressing s.
Transferring data for the spreadsheet program
You can transfer the data in a format which is able to
be directly imported into a spreadsheet program, e.g.
LOTUS or Microsoft EXCEL.
H Note:
Refer to the manual for the spreadsheet program re-
garding information about importing data.
– Select the format SPRD in the function REP
(refer to Page 7-4).
– Then proceed as normal with data transfer.
H Note:
The file header is always transferred with this format;
the transfer of the statistics can be selected as nor-
mal.
Krautkramer DM4E / DM4 / DM4 DL Issue 05, 01/01 7-9
Transferring data to a PC Documenting measurement values (DM4 DL only)
H Note:
If you wish to transfer all measurement sets at once,
select F.ALL.
– Press s.
The selected data are transferred to the PC.
– Press f.
You arrive back into the DM4 DLs active operation
mode.
H Note:
Empty memory locations and empty measurement
sets are not transferred.
The data is now available as ASCII files on your PC
and can be further processed.
Transferring individual measurement values
When a PC is connected you are able to directly trans-
fer a displayed measurement value by pressing s.
Transferring data for the spreadsheet program
You can transfer the data in a format which is able to
be directly imported into a spreadsheet program, e.g.
LOTUS or Microsoft EXCEL.
H Note:
Refer to the manual for the spreadsheet program re-
garding information about importing data.
– Select the format SPRD in the function REP
(refer to Page 7-4).
– Then proceed as normal with data transfer.
H Note:
The file header is always transferred with this format;
the transfer of the statistics can be selected as nor-
mal.