Control and Display Elements
154
7.14.2 CAN diagnostic socket, USB connection and ISOBUS socket
The CAN diagnostic socket (1) and the USB connection (2) are located on the right beside the
driver's seat in the operation console.
The ISOBUS diagnostic socket (3) is located on the right beside the guide's seat.
Fig. 100
NOTICE
The CAN diagnostics socket and the ISOBUS socket must only be used by authorised
technicians who use devices approved by KRONE company.
The CAN diagnostic socket (1) is used to perform diagnostic work and software updates.
It is possible to connect a printer.
The following actions can be performed via the USB connection (2):
• Transfer of customer data from the info centre to a laptop. see page 213
To Next Page
Loading...
