Appendix – CropControl System
9
Pos: 10.7 /BA/Info-Center/CropControl BiG X 600-1100-1/Beschreibung der Grafiken @ 429\mod_1455267745068_78.docx @ 2964016 @ @ 1
Description of graphics (II) for function keys (F1 to F12)
Pos: 10.8 /BA/Info-Center/CropControl BiG X 600-1100-1/Beschreibung der Grafiken (II) @ 428\mod_1455262562168_78.docx @ 2963710 @ @ 1
Fig. 7
Cultivated areas can only be selected
when no is currently active.
One cultivated area forward
Stop yield counter of active cultivated
area.
The displayed cultivated area is
active.
Start yield counter of active cultivated
area
The displayed cultivated area is not
active.
Call menu level of CropControl
The laden weight can be determined
by means of load counter.
Start or stop counterweighing
Short-cut button to the “List of yield
counters”
Pos: 10.9 /Überschriften/Überschriften 3/A-E/B/Bedienung über die Funktionstasten @ 430\mod_1455620117755_78.docx @ 2970651 @ 3 @ 1
1.3.3 Short-cut Buttons in the Working Screen
m
Pos: 10.10 /BA/Info-Center/CropControl BiG X 600-1100-1/Schnellzugriff Nutzfläche auswählen @ 428\mod_1455195678303_78.docx @ 2963027 @ @ 1
Selecting cultivated area
• Select the desired cultivated area by using function keys and .
The selected cultivated area is displayed on the status line!
Once a cultivated area has been started, no other cultivated area can be selected. The yield
counter must first be stopped.
Pos: 10.11 /BA/Info-Center/CropControl BiG X 600-1100-1/Ertragszähler starten @ 428\mod_1455262294760_78.docx @ 2963679 @ @ 1
Starting yield counter
• Start the yield counter for the selected cultivated area by using function key .
The selected cultivated area is displayed on the status line!
At the same time the function key indicates that no yield counter has been started.
Pos: 10.12 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
