Krone BiG X 600-3 - Error Messages (UT)

Appendix – CropControl System
95
Pos: 12.115 /BA/Info-Center/CropControl BiG X 600-1100-1/Menü 15-5 „Monteur“ @ 259\mod_1398675491008_78.docx @ 1980504 @ @ 1
Menu 15-5 Technician
CC000887
CC000888
Fig. 98
Calling the menu
Main menu 15 “Service” is called.
• Press function key or to select menu 15-5 . The selected symbol is
highlighted in grey.
• Press function key
.
Menu 15-5 “Technician” is protected by password.
The display shows the password query.
Pos: 12.116 /Überschriften/Überschriften 3/A-E/AAlarmmeldungen (UT) @ 484\mod_1478848080526_78.docx @ 3260826 @ 3 @ 1
1.4.14 Error Messages (UT)
Pos: 12.117 /BA/Info-Center/CropControl BiG X 600-1100-1/Alarmmeldungen CC @ 259\mod_1398675864753_78.docx @ 1980563 @ @ 1
CC000889
Fig. 99
Alarm message
If there is a disturbance on the CropControl, an alarm message appears in the display and an
audio signal sounds at the same time (constant horn signal). Description, possible cause and
remedy are listed in chapter “Alarm Messages”.
To stop audio signal:
• Press function key .
To acknowledge the alarm:
• Press function key
briefly, the alarm is acknowledged and the audio signal stops.
If the disturbance occurs again, the alarm message will also appear again.
Pos: 12.118 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1