Krone BiG X 600-3 - Menu 1-7-2 Beeper

Info centre "EasyTouch"
242
8.4.8 Menu 1-7-2 Beeper
5 6
7 8
B C D
BX500038_2
5 6
7 8
B C
D
BX500043_1
Fig. 178
In this menu, you can set the signal tone (beeper) for the error messages, information
messages and for pressing a key.
Menu 1-7 "Display" is active.
• You can use the incremental encoder to select menu 1-7-2 "Beeper".
• Press the incremental encoder.
The display indicates the beeper settings.
Icon
Designation
Setting the signal tone when a key is pressed.
Setting the signal tone for error messages.
Setting the signal tone for information messages.
Possible settings
Icon
Explanation
The beeper is inactive.
The beeper is active.
The beeper is active, with reduced volume.
The duration of the signal tone is limited and is specified in seconds.
Setting the volume
To test the beeper, you can switch it on using the
7
key and switch it
off using the
8
key.