EasyManua.ls Logo

Krone EasyCut 6210 CV - PTO Shaft

Krone EasyCut 6210 CV
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Start-up
34
6.7 PTO shaft
Danger! - Rotating PTO shaft
Effect: Danger to life or serious injuries
Install or detach the PTO shaft only with the engine switched off and the ignition key
removed.
Secure the tractor against rolling.
Make sure that the PTO shaft is coupled properly (the lock of the PTO shaft must have
snapped in).
Make sure that the protective devices are attached properly.
Never use a PTO shaft, the protective devices of which have not been attached.
Replace damaged protective devices immediately
Attach the safety chain of the PTO shaft so that the guard tube does not rotate
simultaneously with the PTO shaft.
Danger! - Incorrect PTO speed
Effect: Danger to life, serious injuries or damage to the machine.
This machine may only be driven with a max. PTO speed of 1000 rpm.
Before switching on the PTO, make sure that you have selected the correct PTO speed.
Caution! - Swivel range of the PTO shaft
Effect: Damage to the tractor or the machine
Check the swivel range and clearance of the PTO shaft!

Table of Contents

Related product manuals