117
Lubrication Chart ................................................96
M
Main gearbox......................................................73
Maintenance .................................................18, 69
Maintenance – lubrication chart..........................94
Mounting onto the Tractor.............................29, 33
Mower Drive Gearbox.........................................75
O
Oil Level Check and Oil Change Intervals
(Gearboxes)....................................................72
Oil level check and oil change on the cutter bar.76
Oil Tank.............................................................111
Operation ............................................................44
P
Parking................................................................54
Periodical Inspection of the Cutting Discs / Blade
Drums .............................................................82
Periodical Inspection of the Leaf Springs ...........81
Personnel Qualification and Training..................13
Placing in Storage...............................................98
Position of the Adhesive Safety Stickers on the
Cross Conveyor............................................104
Position of the Adhesive Safety Stickers on the
Machine ..........................................................20
Position of the General Information Labels on the
Cross Conveyor............................................106
Position of the General Information Labels on the
Machine ..........................................................24
PTO operation ....................................................16
PTO shaft................................................31, 38, 95
Purpose of Use.....................................................8
R
Re-Ordering the Adhesive Safety and Information
Labels .............................................................27
Replacing the hydraulic oil filter........................113
Replacing the linings.......................................... 87
Rotary hub with shear fuse (optional)................ 88
S
Safety................................................................. 12
Safety Instructions and Accident Prevention
Regulations.................................................... 14
Safety Instructions on the Machine.................. 103
Safety-conscious work practices ....................... 13
Setting Conveyor Belt ...................................... 109
Setting of the pole protection mechanism ......... 64
Setting the coupling rod ..................................... 30
Settings.............................................................. 55
Spare Parts........................................................ 70
Special equipment ........................................... 102
Speed gearbox................................................... 74
Start-up .............................................................. 33
Switching from working position to transport
position........................................................... 41
Swivelling parking support into transport position
................................................................. 40, 49
T
Technical data.................................................... 10
Test run.............................................................. 99
Test run.............................................................. 69
Tightening Torques............................................ 70
Tightening Torques (Countersunk Screws) ....... 71
Tyres .................................................................. 17
U
Unauthorised Conversion/Modification and Spare
Parts Production ............................................ 19
W
Wide spreading.................................................. 66
Working in the vicinity of power transmission lines
....................................................................... 19
To Next Page
Loading...
