Krone EasyCut 9140 CV - Filling Quantities and Lubrication Designations for Gearboxes; Oil Level Check and Oil Change Intervals (Gearboxes)

Maintenance
72
Pos: 25.19 /Überschrif ten/Überschrif ten 2/F-J/Füll mengen und Sc hmiermittelbez eichnungen der Getriebe @ 0\m od_11969510940 46_78.doc @ 15335
10.5 Filling Quantities and Lubrication Designations for Gearboxes
Pos: 25.20 /BA/ Wartung/Tabelle n_Füllmengen/M ähwerke/Tabelle Füllmengen EC 7540/9140/10000 S hift @ 41\mod _1271854358 648_78.doc @ 373 574
Filling
Quantity
Filtered oils
Bio-degradable
lubricants
[litres] Brand name Brand name
Main gearbox 1.7
SAE 90
On request
Main gearbox (cross conveyor) 2.2
Speed gearbox (CV machines) 2 x 1.9 l
Mower Drive Gearbox 2 x 0.4
Cutter bar EasyCut 7540 2 x 6.0 l
Cutter bar EasyCut 9140 2 x 7.0 l
Cutter bar EasyCut 9140 CV 2 x 7.0 l
Cutter bar EasyCut 10000 Shift 2 x 8.0 l
Pos: 25.21 /BA/ Wartung/Zeitinter valle an den Getri eben @ 0\ mod_119695191 9921_78.doc @ 1 5373
10.5.1 Oil Level Check and Oil Change Intervals (Gearboxes)
Note - Oil level check and oil change (gearboxes) and lubricating the machine
Effect: Long expected service life of machine
• First oil change on all gearboxes after 50 operating hours, then every 200 operating
hours (but at least once a year).
• Before using the machine always check the oil level.
• With bio-degradable oils the changing intervals must be complied with absolutely
because of ageing of the oils.
Pos: 25.22 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65