Krone EasyCut 9140 CV - Adjusting the Conditioner Plate

Settings
63
Pos: 21.41 /Überschrif ten/Überschrif ten 2/A-E/Ein stellen des A ufbereitungsblec hs @ 0\mod_ 1196670615681 _78.doc @ 10399
9.8 Adjusting the conditioner plate
Pos: 21.42 /Ab kürzungen /Abkürz ungen sprac hneutral/EasyC ut/EasyCut 914 0CV @ 11\mod_1223 444731538_0.d oc @ 146416
(EasyCut 9140 CV)
Pos: 21.43 /BA/Ei nstellungen/M ähwerke/Einstellu ng des Aufb ereitungsbleches Bild EC 28/32 CV 2 80/320 CV @ 3\ mod_120471 3442195_78.doc @ 72144
EC-032-0
Fig. 34
Pos: 21.44 /BA/Ei nstellungen/M ähwerke/Einstellu ng des Aufb ereitungsbleches T ext EasyCut @ 3\mod_120471 3282555_78.doc @ 72125
The conditioning of the mowed crop can be influenced by adjusting the conditioning plate
through the crank (1). The adjustment depends on the desired degree of conditioning of the
crop.
+: Degree of conditioning is increased
-: Degree of conditioning is decreased
Always check the tedder for damaged tines before the machine is used:
Straighten any bent tines.
Replace any broken tines.
Pos: 21.45 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65