Introduction
10
Pos: 10 /BA/Einleitu ng/Technische Daten/ Schwader/Swadro 1000 @ 90\ mod_1322810560248_7 8.docx @ 766318 @ @ 1
Road travel is only permitted with the swivelled rotary arms in transport position. The max.
height of 4 m must not be exceeded.
Type Swadro 1000
Lower suspension arm hitch Unit standard
Number of rotors Unit 2
Number of arms / rotors Unit 15
Number of double tines / arms approx. mm 4
Working width approx. mm 8900 - 10000
Rotor diameter approx. mm 4200
Height with tine arms / transport position approx. mm 4550
Height of retracted tine arms / transport position approx. mm 3900
Height in working position approx. mm 1700
Length approx. mm 7000
Width in transport position approx. mm 2995
Width in working position approx. mm 8900 - 10000
Power consumption approx.
kW/HP
51/70
PTO speed rpm max. 540
Equivalent continuous pneumatic level recorder below 70 d B(A)
Acreage approx./h 9 - 10
Tyres on rotor running gear Tridem axle
Main running gear
16x6.50-8 4PR
15/55-17 10PR
Tyre pressure guide wheels and running gear bar 1
Electrical power indicator light Volt 12
Max. operating pressure of hydraulic system bar 200
Required hydraulic connections
Free backflow required
1 SA *
Yes
Dead weight kg 3300
Permissible axle load kg 1500
Permissible bearing load kg 1800
*) SA= Single-action control unit
Pos: 11 /BA/Einleitu ng/Technische Daten/ Schwader/Technisc he Daten Bild SW 1000 @ 2\mod_120290 6780774_78.doc x @ 62519 @ @ 1