Krone Swadro 1000 - Transport to Working Position; Lowering Machine Danger

Operation
56
Pos: 27.5 /Überschri ften/Überschri ften 2/U-Z/Von Transport i n Arbeitsstellung @ 2\ mod_1202466185276_78. docx @ 59662 @ @ 1
9.2 From transport into working position
Pos: 27.6 /BA/Sic herheit/Gefahrenhin weise/Schwader/Gefahr Maschine absenken @ 5\ mod_1213694805078_78. docx @ 88774 @ @ 1
Danger! – Lowering the machine into working position
Danger to life, injuries or damage to the machine.
• Lower the machine only when you are absolutely sure that neither persons, animals nor
objects are in the swivel range of the machine.
• Switch the PTO on only when the machine is in working position, the collapsible tine
arms are swivelled into the working position and the hoop guards are turned downwards.
Pos: 27.7 /BA/Bedienung / Schwader/Zinken / Zin kenarme/Zinkensc hutze entfernen SW 807/ 810/907 @ 2\mod_120246703 8839_78.docx @ 59738 @ @ 1
9.3 Removing the tine protections from the tine tips
SW9070021
2
1
Figure 31
• Remove the tine protections (1).
• Insert the tine protections into the support (2) (right and left side of the machine) and and
secure with the linch pin.
Pos: 27.8 /BA/Bedienung / Schwader/Krei selarme senken/heben/Kr eiselarme senken SW 1000 @ 2\mod_1202970419390_7 8.docx @ 63316 @ @ 1
9.4 Lower rotor arms to working position
SW1000008
• Pressurise the hydraulic system.
• Turn on Control Unit.
• Lower rotor (see Chapter on Control Unit Medium "Lowering rotors in headland position /
Lowering all rotors in working position).
Pos: 27.9 /BA/--- ------------ Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ 2 @ 1