Medium Control Unit
42
Pos: 21.36 /BA/Inf o-Center/Schwader/Bedi eneinheit - Mediu m/Swadro 1000/Alarmmeldun gen @ 2\mod_120332471 3152_78.docx @ 65631 @ 2 @ 1
6.14 Alarm Messages
If a fault occurs in the machine's electronics, it will be displayed by an appropriate flashing
signal of the LED on the
key. The buzzer also sounds the same error code for 5 cycles.
Pos: 21.37 /BA/Inf o-Center/Schwader/Bedi eneinheit - Mediu m/Swadro 1000/Beispiel Se nsorfehler @ 2\mod_12033 24866121_78.doc x @ 65650 @ @ 1
Example: Sensor error (11) (Error code "21")
0 1 2 3 4 5
1
0
t6 7
21 21= 21" = 21"
SW1000033
Figure 20
Temporal sequence:
Pulse duration 200 ms, pulse pause 200 ms, pause between two signal sequences 2 s, pause
between the numbers of a signal sequence 800 ms.
Pos: 21.38 /BA/--- ------------ Seitenumbruch------ ---------- @ 0\mod_119617 5311226_0.doc x @ 4165 @ @ 1
To Next Page
Loading...
