Krone Swadro 1000 - Adjusting Rotor Working Height

Medium Control Unit
40
Pos: 21.32 /BA/Inf o-Center/Schwader/Bedi eneinheit - Mediu m/Swadro 1000/Arbeitsh öhe der Kreisel einstel len @ 2\mod_120332310434 0_78.docx @ 65592 @ 2 @ 1
6.12 Adjusting the Working Height of the Rotors (optional)
SW1000032
Figure 18
• Press the
key.
Pilot lamp (11) flashes.
Activate the key or the key to select the rotor. Only one rotor can ever be selected at
a time.
To increase the working height:
Press the key
To reduce the working height:
Press the
key
Pressing the
key again deactivates the function.
Note
The raking height is adjusted during use or in headland position.
Pos: 21.33 /BA/--- ------------ Seitenumbruch------ ---------- @ 0\mod_119617 5311226_0.doc x @ 4165 @ @ 1