Maintenance - hydraulic system
89
Retracting the rotor arms
• Start engine and pressurise hydraulic system
• Screw in the starwheel screw on valve (Y5/Y6).
• Activate valve (Function 1) until the rotor arms are fully retracted.
• Unscrew the starwheel screw again on valve (Y5/Y6) as far as it goes.
Note
After emergency manual activation has been performed, the starwheel screws for emergency
manual activation must all be completely screwed out again!
Pos: 42.37.18 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.doc x @ 4165 @ @ 1
To Next Page
Loading...
