KSB Amarex User Manual

4 Description of the Pump (Set)
17 of 82
Amarex
2573.820/02-EN
Impeller type
▪ Various application-oriented impeller types
Bearings
Motor-end bearings:
▪ Grease-packed bearings sealed for life
▪ Maintenance-free
Pump-end bearings:
▪ Grease-packed bearings sealed for life
▪ Maintenance-free
▪ Reinforced bearings
4)
4.6 Installation types
Table8: Installation type S, stationary wet installation
Installation type Description Comment
Guide hoop arrangement
P1: pump
P2: installation parts for guide hoop arrangement,
installation depth = 1.5m/ 1.8m/ 2.1m
P5: claw
P7: chain and shackle
Only available for specific sizes,
see selection configurator.
Guide wire arrangement
P1: pump
P4: installation parts for guide hoop arrangement,
installation depth = 4.5m / 9.5m / 14.5m
P5: claw
P7: chain and shackle
4
Standard for impeller type D-max, optional for impeller type F-max

KSB Amarex Specifications

General

Material	Cast iron, stainless steel
Operating mode	Continuous
Type	Submersible Pump
Application	Sewage
Explosion protection	Available with explosion protection
Frequency	50 Hz, 60 Hz
Impeller Type	Multi-vane