KSB Amarex User Manual

5 Installation at Site
30 of 82
Amarex
2573.820/02-EN
UG1803370
Fig.14: Attaching the lifting chain/ lifting rope for stationary wet installation
1. Attach the lifting chain with shackle or the lifting rope to the pump set handle.
This attachment point achieves a forward inclination of the pump set towards
the discharge nozzle, which allows the pump claw to hook onto the duckfoot
bend.
Transportable wet-installed model
UG1803370
Attaching the lifting chain/ lifting rope for transportable wet installation
1. Attach the lifting chain with shackle or the lifting rope to the pump set handle.
This attachment point achieves an upright position of the pump set.
Table15: Types of attachment
Drawing Type of fastening
Shackle with chain at the pump casing
59-17 Shackle
59-18 Hook
885 Lifting chain/ lifting rope

KSB Amarex Specifications

General

Material	Cast iron, stainless steel
Operating mode	Continuous
Type	Submersible Pump
Application	Sewage
Explosion protection	Available with explosion protection
Frequency	50 Hz, 60 Hz
Impeller Type	Multi-vane