KSB Multitec - List of Components

Multitec
9.1 List of Components
This list of components contains all spare parts mentioned in this document.
Part No. Description
106.1/.2 Suction casing
107 Discharge casing
108.1 Stage casing
160.1/.2 Cover
171.1 Diffuser
181 Pump stool
182 Foot
210 Shaft 1)
230 Impeller 1)
231 Suction impeller 1)
320.1/.2 Rolling element bearing 1)
341 Drive lantern
342 Thrust bearing lantern
350 Bearing housing
360.1 Bearing cover
361.1 Non-drive end bearing cover
381 Bearing cartridge 1)
400.1 Gasket
411.1/2/3/4/5/6/7/8/13 Joint ring 1)
412.1/2/3/4/5/10/11/12 O-ring 1)
421.12/3 Radial seal ring
433.1/7/10 Mechanical seal
441.1/4 Seal housing
452 Gland cover
461 Gland packing 1)
471.1/2 Seal cover
500.1 Ring
502.1/2 Casing wear ring 1)
520.1/2/3/4 Sleeve 1)
523.1 Shaft sleeve
524 Shaft protecting sleeve 1)
525.1/2 Spacer sleeve 1)
529 Bearing sleeve SiC 1)
540.1/2 Bush 1)
550.1/2/3/4/6/8/9/10/11 Disc 1)
551.1/.2 Spacer disc
561.1 Grooved pin
565 Rivet
59-4 Balance drum 1)
59-7 Support
636 Lubricating nipple
638 Constant level oiler
681.2 Coupling guard
683.1 Hood
701.1/2 Pipe
723.1 Flange
731./3/4/5 Pipe union
800 Motor
831.1 Fan impeller
861.1/2/3/4 Coupling half
87-5 Axle
89-8 Foundation rail
900.2 Screw
901.12/3/4/5/6/7/8/9/10/11/12 Hex. head bolt
902.2 Stud
903.1/2/3/4/5/9/10/11/14 Screwed plug
905 Tie bolt
914.1 Socket head cap screw
920.12/3/4/5/6/7/9/10/11 Nut
931 Lockwasher
932.1/2 Circlip
940.1/2/3/4/5 Key
950.2/3 Spring
971.1 Plate
1) recommended spare parts (see section 7.3.7)
28