EasyManua.ls Logo

KSB Sewatec - 3 Transport;Temporary Storage;Disposal; Delivery Inspection; Safe Transport Procedures

KSB Sewatec
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Transport/Temporary Storage/Disposal
13 of 96
Sewatec
3 Transport/Temporary Storage/Disposal
3.1 Checking the condition upon delivery
1. On transfer of goods, check each packaging unit for damage.
2. In the event of in-transit damage, assess the exact damage, document it and
notify KSB or the supplying dealer and the insurer about the damage in writing
immediately.
3.2 Transport
DANGER
The pump (set) could slip out of the suspension arrangement
Danger to life from falling parts!
▷ Always transport the pump (set) in the specified position.
▷ Never attach the suspension arrangement to the free shaft end or the motor
eyebolt.
▷ Observe the information on weights, centre of gravity and fastening points.
▷ Observe the applicable local accident prevention regulations.
▷ Use suitable, permitted lifting accessories, e.g. self-tightening lifting tongs.
WARNING
Uncontrolled lifting of the pump (set) or drive
Risk of injury!
▷ Maintain adequate safety distance during lifting operations (load may swing
when being lifted).
WARNING
Placing the pump set on unsecured and uneven surfaces
Personal injury and damage to property!
▷ Only place the pump set on a surface of sufficient load-carrying capacity.
▷ Use appropriate means to secure the pump set against tilting or tipping over.
To transport the pump/pump set suspend it from the lifting tackle as shown.

Table of Contents

KSB Sewatec - 3 Transport;Temporary Storage;Disposal; Delivery Inspection; Safe Transport Procedures