KSB Sewatec - 10 EU Declaration of Conformity; EU Declaration of Conformity Details

10 EU Declaration of Conformity
92 of 96
Sewatec
10 EU Declaration of Conformity
Manufacturer: KSB SE & Co. KGaA
Johann-Klein-Straße 9
67227 Frankenthal (Germany)
The manufacturer herewith declares that the product:
Sewabloc, Sewatec
KSB order number: ...................................................................................................
▪ is in conformity with the provisions of the following Directives as amended from time to time:
– Pump (set): Machinery Directive 2006/42/EC
The manufacturer also declares that
▪ the following harmonised international standards have been applied:
– ISO 12100
– EN 809
Person authorised to compile the technical file:
Name
Function
Address (company)
Address (Street, No.)
Address (post or ZIP code, city) (country)
The EU Declaration of Conformity was issued in/on:
Place, date
..............................
16)
.............................
Name
Function
Company
Address
16) A signed, legally binding EU Declaration of Conformity is supplied with the product.