13 BRAKE SYSTEM 101
100135-10
– Check the thickness of the front and rear brake discs at multiple points on each brake
disc to ensure it is at least thickness
.
Info
Wear will reduce the thickness of the brake disc at contact surface
of the
brake linings.
Brake discs - wear limit
Front 4.2 mm (0.165 in)
Rear 4.5 mm (0.177 in)
» If the brake disc thickness is less than the specified value.
– Change the front brake disc.
– Change the rear brake disc.
– Check the front and rear brake discs for damage, cracking, and deformation.
» If the brake disc exhibits damage, cracking, or deformation:
– Change the front brake disc.
– Change the rear brake disc.
13.4 Checking the brake fluid level of the front brake
Warning
Danger of accidents Brake system failure.
– If the brake fluid level drops below the specified marking or the specified value, this is an indication that the brake system is
leaking or that the brake linings are completely worn down. Check the brake system and do not continue riding. (Your autho-
rized KTM workshop will be glad to help.)
To Next Page
Loading...
