EasyManua.ls Logo

KTM 2016 690 DUKE R - Filling;Bleeding the Cooling System

KTM 2016 690 DUKE R
207 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 COOLING SYSTEM 153
16.5 Filling/bleeding the cooling system
Warning
Danger of poisoningCoolant is poisonous and a health hazard.
Coolant must not come into contact with the skin, eyes, or clothing. If contact occurs with the eyes, rinse with water immedi-
ately and contact a physician. Immediately clean contaminated areas on the skin with soap and water. If fuel is swallowed, con-
tact a physician immediately. Change clothing that is contaminated with coolant. Keep coolant out of reach of children.
V00077-10
Remove radiator cap
.
K00444-10
Remove bleeder screw
.
Tilt the vehicle slightly to the right.
Pour in coolant until it emerges without bubbles at the vent hole, and then mount and
tighten bleeder screw
immediately.
Coolant 1.20 l (1.27 qt.) Coolant ( p. 190)
Completely fill the radiator with coolant. Mount radiator cap
.
Rest the vehicle on the side stand.
Check the coolant level in the compensating tank. ( p. 150)

Table of Contents

Related product manuals