16 COOLING SYSTEM 150
Info
Do not start up the motorcycle!
– Fill/bleed the cooling system. ( p. 153)
–
Mount cap
of the compensating tank.
– Check the coolant level in the radiator.
The radiator must be filled completely.
» If the coolant level does not match the specified value:
– Check the coolant level and the reason for the loss.
Coolant ( p. 190)
» If you had to add more coolant than the specified amount:
> 0.50 l (> 0.53 qt.)
– Fill/bleed the cooling system. ( p. 153)
–
Mount radiator cap
.
16.3 Checking the coolant level in the compensating tank
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
– Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.
To Next Page
Loading...
