7 COMBINATION INSTRUMENT 46
7.17 "MTC/ABS"
K00396-01
Condition
R model
Warning
Voiding of the government approval for road use and the insurance coverage If
the ABS is switched off completely, the vehicle's approval for road use is invali-
dated.
– Only operate the vehicle in closed-off areas remote from public road traffic if
the ABS is switched off completely.
– Press the UP or DOWN button until the "MTC"/"ABS" menu appears on the display. Press-
ing the SET button opens the menu.
In the "MTC/ABS" menu, "MTC" and "ABS" can be switched off.
In "ABS Mode", you can select between "Road" and "SupMot".
Info
After the ignition is switched on, motorcycle traction control and ABS are enabled
again.
When the "Road" ABS mode is enabled, ABS controls both wheels.
When the "SupMot" ABS mode is enabled, ABS only controls the front wheel. The
rear wheel is not controlled by ABS and may lock during braking maneuvers.
To Next Page
Loading...
