14 WHEELS, TIRES 118
M00665-10
Main work
– Press the brake caliper onto the brake disc by hand in order to push back the brake pis-
ton.
–
Remove screw
and pull wheel speed sensor
out of the hole.
–
Remove nut
. Remove chain adjuster
.
M00666-10
–
Withdraw wheel spindle
only enough to allow the rear wheel to be pushed forward.
M00667-01
– Push the rear wheel forward as far as possible. Remove the chain from the rear
sprocket.
Info
Cover the components to protect them against damage.
– Hold the rear wheel and remove the wheel spindle.
– Pull the rear wheel back until the brake caliper support is suspended freely between the
brake disc and rim.
To Next Page
Loading...
