REQUIRED CARE AND MAINTENANCE BY THE DRIVER
Check the oil level
Check the front and rear brake fluid level
Check the front and rear brake linings for wear
Check the lighting system for proper functioning
Check the horn for proper functioning
Lubricate and adjust the cables and nipples
Bleed the fork legs regularly
Remove and clean the dust boots regularly
Check the steering head support for play
Clean and lubricate the chain, whenever necessary
Check the chain tension
Clean the air filter and filter box (depending on how soiled they are)
Check and adjust the steering head bearing
Check the tire pressure and tires for wear
Check the cooling liquid level
Check the fuel lines for leaks
Drain the float chamber
Check all control elements for smooth operation
Check the brake performance
Treat exposed metal components (except brake and exhaust systems)
with wax- based anti-corrosion agents
Treat ignition/steering lock and light switch with contact spray
Regularly check all screws, nuts and clamps for a tight fit
At least
once a year
After
offroad use
After
cleaning
Before each
start
LUBRICATION AND MAINTENANCE CHART
KTM 400 LS-E/mil
RECOMMENDED MAINTENANCE WORK - ADDITIONAL WORK TO BE PERFORMED UNDER A SEPARATE ORDER
Completely service the fork
Completely service the shock absorber
Clean and grease the rocker arm
Clean and grease the steering head bearing and gasket elements
Clean and adjust the carburetor
Treat the electric contacts and switches with contract spray
Treat the battery connections with contact grease
Change the brake fluid
Change the cooling liquid
Every 3 years
Every 2 years or
20000 km
At least
once a year
17
To Next Page
Loading...
