EasyManua.ls Logo

KTM 400 LS-E/MIL - ELECTRICAL SYSTEM FUSE MANAGEMENT; Main Fuse Protection and Replacement; Power Consumer Fuse Identification

KTM 400 LS-E/MIL
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A
B
A
12345
B
6
Main fuse
The main fuse A , located near the battery under the seat, protects all of
the electric power consumers.
Always replace blown fuses with an equivalent fuse. Visit a workshop if a
new fuse blows again after it is inserted. It has a capacity of 20 amperes
!
CAUTION
!
NEVER USE A STRONGER FUSE OR A REPAIRED FUSE. IMPROPER USE CAN DESTROY THE
ENTIRE ELECTRIC SYSTEM
!
Fuses for individual power consumers
The fuse box B is located under the seat.
To remove and mount the seat see "Removing the seat".
The fuses are numbered on the inside of the fuse box.
Fuses marked "RES" are spare fuses
6.
The following power consumers are protected by fuse
1 (10 amperes):
Headlight lamp
Parking light lamp
License plate illumination
The following power consumers are protected by fuse 2 (10 amperes):
Parking light
Turn signal
Brake light
Horn
Headlight flasher
The following power consumers are protected by fuse
3 (10 amperes):
Ignition
Electric starter system
Fan
The following power consumers are protected by fuse 4 (10 amperes):
Grip heater
Camouflage light
The following power consumers are protected by fuse
5 (10 amperes):
Socket (constant current supply)
Always replace blown fuses with an equivalent fuse. Visit a workshop if a
new fuse blows again after it is inserted. It has a capacity of 20 amperes.
!
CAUTION
!
NEVER USE A STRONGER FUSE OR A REPAIRED FUSE. IMPROPER USE CAN DESTROY THE
ENTIRE ELECTRIC SYSTEM
.
30

Table of Contents

Related product manuals