KTM 690 SMC - Checking Engine Oil Level; Changing Engine Oil and Oil Filter, Cleaning Oil Screens

MAINTENANCE WORK ON CHASSIS AND ENGINE 140
9.78Checking engine oil level
Info
The engine oil level must be checked when the engine is at operating temperature.
– Stand the motorcycle upright on a horizontal surface.
600602-01
Condition
The engine is at operating temperature.
– Check the engine oil level.
Info
After switching off the engine, wait for one minute and then check.
The engine oil must be between the lower and upper edge of the oil level viewer.
» If the engine oil level is not at the specified level:
– Top up the engine oil. ( S. 147)
9.79Changing engine oil and oil filter, cleaning oil screensx
–
Drain the engine oil.x ( S. 141)
–
Remove the oil filter.x ( S. 142)
–
Clean oil screens.x ( S. 144)
–
Mount the oil filter.x ( S. 144)
–
Fill up with engine oil.x ( S. 146)