RIDING INSTRUCTIONS 48
7RIDING INSTRUCTIONS
7.1
Checks before putting into operation
Info
Make sure that the motorcycle is in a perfect technical condition before use.
In the interests of riding safety, make a habit of making a general check before you ride.
– Check the engine oil level. ( S. 140)
– Check the engine for loss of oil.
– Check the fuel level.
– Bleed fork legs. ( S. 70)
Guideline
all 1,000km (621.4mi)
– Check the chain tension. ( S. 78)
– Clean the chain. ( S. 77)
– Check the tire condition. ( S. 107)
– Checking the tire air pressure. ( S. 109)
– Check the front brake brake fluid level. ( S. 85)
– Check the rear brake fluid level. ( S. 94)
– Check the front brake linings. ( S. 88)
– Check the rear brake linings. ( S. 97)
– Check brake system function.
– Check the coolant level. ( S. 132)
– Check that all operating elements are correctly adjusted and free to move.
– Check the functioning of the electrical equipment.
– Check that baggage is correctly secured.
– Sit on the motorcycle and check the rear mirror setting.
To Next Page
Loading...
