GENERAL TIPS ON PUTTING INTO OPERATION 45
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
– Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the service record at vehicle handover.
– Before your first trip, read the entire operating instructions carefully.
– Get to know the operating elements.
– adjust the basic position of clutch lever. ( S. 137)
– adjust the basic position of handbrake lever. ( S. 84)
–
Adjust the basic position of the foot brake pedal.x ( S. 93)
– Get used to handling the vehicle on a car park before making a longer trip. Try also to ride as slowly as possible and in a standing posi-
tion to get a better feeling for the vehicle.
– Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
– Do not make any changes to the vehicle, and use only KTM approved parts.
Info
Parts from other manufacturers can reduce the operational safety of the vehicle.
– Run the engine in.
6.2Running in the engine
– During the running-in phase, do not exceed the specified engine speed and engine performance.
Guideline
Maximum engine speed
During the first: 1,000km (621.4mi) 6,000rpm
After the first: 1,000km (621.4mi) 7,800rpm
To Next Page
Loading...
