SERVICE SCHEDULE 10
29
every 12 months
Every 80 operating hours
Every 40 operating hours
Every 20 operating hours
After 10 operating hours
Check the rubber buffer and pivot points of the shock absorber. (SX‑E 3) ( p. 58) ● ● ●
Perform the shock absorber service. ●
Check the tightness of the easily accessible, safety-relevant screws and nuts. ○ ● ● ●
Check the steering head bearing play. ( p. 53) ○ ● ● ●
Lubricate the steering head bearing. ( p. 55) ●
Check the pinion shaft bearings, O-rings and the bearing seals. ●
Change the pinion shaft bearings, the O-rings and the bearing seals. ● ●
Final check: Check the vehicle for safe operation and take a test ride. ○ ● ● ●
Read out the fault memory after the test ride using the KTM diagnostics tool. ○ ● ● ●
Make a service entry in the KTM Dealer.net. ○ ● ● ●
○ One-time interval
● Periodic interval
To Next Page
Loading...
