13 SERVICE WORK ON THE CHASSIS
46
13.1 Raising the motorcycle with a lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
401942-01
– Raise the motorcycle at the frame underneath the engine.
Lift stand (78929955100)
Neither wheel is in contact with the ground.
– Secure the motorcycle against falling over.
13.2 Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
402581-10
– Remove the motorcycle from the lift stand.
– Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
1
into the plug-
in stand bracket on the left side of the vehicle.
Info
Remove the plug-in stand before riding.
13.3 Bleeding the fork legs
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 46)
M02044-10
Main work
(SX‑E 3)
–
Release bleeder screws
1
.
Any excess pressure escapes from the interior of the
fork.
– Tighten the bleeder screws.
To Next Page
Loading...
