11 SUSPENSION SETTING
38
Info
This is due to the volume of the hose and not due to a
defect in the fork airpump or the fork.
Read the accompanying instructions.
– Adjust the air pressure as specified.
Guideline
Air pressure 1 bar (15 psi)
Gradual changing of the air
pressure in steps of
0.2 bar (3 psi)
Minimum air pressure 1.4 bar (20 psi)
Maximum air pressure 4 bar (58 psi)
Info
Never adjust the air pressure to a value outside the
stated range.
– Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from the
hose – the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically after
80 seconds.
– Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
– Remove the motorcycle from the lift stand. ( p. 46)
11.14 Adjusting the rebound damping of the fork (SX‑E 5)
Info
The hydraulic rebound damping determines the fork suspension behavior.
F02189-10
–
Turn adjuster
1
clockwise all the way to the stop.
Info
Adjuster
1
is located at the upper end of the right
fork leg.
– Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
Rebound damping
Comfort 15 clicks
Standard 12 clicks
Sport 10 clicks
To Next Page
Loading...
