Kubota G23 Assembly Instructions

3
ENGLISH
BINSTALL THE REAR TIRES
1. Remove the shipping bracket.
2. Mount the tire, and fasten the bolts securely.
A Tightening torque: 108.5 to 130.2 N-m
(11.1 to 13.3 kgf-m)
A Use the bolts in the parts box.
(Do not use the bolts in the shipping bracket.)
BINSTALL THE SEAT
1. Attach the springs to the seat.
2. Attach the seat to the tractor and insert the snap pins.
3. Connect the seat harness.
(A) Snap pin
(A) Seat harness

Kubota G23 Specifications

General

Engine Power	23 HP
Transmission	Hydrostatic
Cutting Width	48 inches
Fuel Type	Diesel
Drive	2WD
Number of Blades	3
Engine Type	Diesel
Fuel Capacity	6.3 gallons