EasyManua.ls Logo

KUHN FC302G - Page 77

KUHN FC302G
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10. - Maintenance and storage
FC302G - FC302GI - FC352G
77
KN270BGB_F
Mower conditioner
Lower gearbox:
- Remove filler plug (1) and its washer.
- Place a container of sufficient capacity under drain
plug (2).
- Remove drain plug (2) and its washer.
- Allow oil to drain completely.
- Wait for dripping to stop.
- Clean and reinstall drain plug (2) and its
washer. (Replace if necessary).
- Pour the correct oil quantity and quality through the
opening of the filler plug (1).
- Clean and reinstall filler plug (1) and its
washer. Replace if necessary.
1
2
- Check oil level in upper gearbox:
• Remove filler plug (1) and its washer.
The oil level must reach the lower edge of level
hole (1).
• Top up if necessary.
Clean and reinstall filler plug (1) and its
washer. Replace if necessary.
Before draining oil, operate the machine for a
few minutes so that the oil warms up.
FC302G - FC302GI - FC352G
Oil volume 2.5 L (0.66 US gal)
Type of oil Mineral oil (Gear oil)
Viscosity SAE80W90
Specification API-GL5 (extreme pressure)

Table of Contents

Related product manuals