Kuka KR C2 - PE equipotential bonding

Machine Data
74 of 91
Maschinendaten 12.0400 en
2.1.151 $SINGUL_POS
Treatment of an undefined joint positions
Data type int
min
V
a
l
u
e
0
Unit -- --
V
a
l
ue
max
1
Assignment [1] [2] [3]
Configuration of the treatment of undefined joint positions on specification of a singular PTP
end point.
Description of the permissible values:
The value 0 means that the corresponding axis is moved to 0 degrees, while the value 1
means that the axis value of the start point is used.
0 Use theta=0 degrees
1 Use old value of theta
Example
If the end point of a PTP motion results in the wrist singularity (Alpha 5), the angles of
axes 4 and 6 cannot be determined unambiguously.
If $SINGUL_POS[3] is equal to 0, the angle of axis 4 will in any case be moved to
0 degrees, while the value 1 means that the value of the start point is retained for
axis 4. The angle of axis 6 is then adapted accordingly.
2.1.152 $DIS_WRP1
Average distance of wrist point from singularity 1 (Alpha1 singularity)
Data type real
min
V
a
l
u
e
-- --
Unit -- --
V
a
l
ue
max
-- --
Assignment -- --
2.1.153 $DIS_WRP2
Average distance of wrist point from singularity 2 (Alpha5 singularity)
Data type real
min
V
a
l
u
e
-- --
Unit -- --
V
a
l
ue
max
-- --
Assignment -- --