Kurzweil Forte - The FX Page; FX Page Parameters

Program Edit Mode
The FX Page
7-14
The FX Page
Press the FX soft button to call up the FX page (Eects page). Use this page to apply audio
eects to a program. You can choose an eects chain for insert eects and an eects chain for
auxiliary eects 1 and 2. When the Global Mode User Type is set to Advanced, the selected
Chain can be edited by pressing the Favorites 1 button. See Ch. 8 The Effects Chain
Editor for details.
e Forte’s chains contain a variety of eects. Each chain displays icons representing the
type of eects contained in the chain, as well as the order of eects in the chain (signal ows
from left to right). e Forte’s chains include dierent types of reverb, chorus, delay, anger,
phaser, tremolo, panner, leslie, distortion, EQ, compression, lter, envelope following lter,
frequency stimulator, ring modulator, frequency oset, pitch LFO, and stereoizer.
FX Page Parameters
Parameter Range Of Values Default Value
Insert Effect list (See Appendix F) 0 None
Aux 1 Effect list (See Appendix F) 0 None
Aux 1 Send 0 to 100% 0%
Aux 2 Effect list (See Appendix F) 0 None
Aux 2 Send 0 to 100% 0%
Aux 2 Send (Piano Programs) Off, -95dB to 24dB Off
Output
A, B A
Pre/Post Ins Post, Pre Pre