Kurzweil Forte - The KEYMAP Page; KEYMAP Page Parameters; Stereo

Program Edit Mode
The KEYMAP Page
7-23
The KEYMAP Page
Press the KEYMAP soft button to call up the KEYMAP page. e parameters on this page
aect sample root selection, i.e., which samples are played on which keys.
KEYMAP Page Parameters
Parameter Range of Values Default
Keymap Keymap List 1 Piano f Left
Stereo Off, On Off
Transpose -128 to 127 semitones 0
Key Tracking ± 2400 cents per key 100
Velocity Tracking ± 7200 cents 0
Alt Method Switched, Continuous Switched
Alt Control Control Source List Off
Timbre Shift ± 60 semitones 0
Playback Mode Norm, Rvrs, Bidirectional, Noise Normal
String Resonance Off, On Off
Stereo
You’ll use this parameter when you’re working with stereo samples. When you set this
parameter to On, an additional Keymap parameter appears. e two keymap parameters are
distinguished as Keymap 1 and Keymap 2. e KEYMAP page parameters will aect both
keymaps. When the Stereo parameter is set to On, the OUTPUT page for the current layer
will show an additional Pan parameter.