Kurzweil Forte - Differences between Regular and Advanced User Type; Selecting Parameters; The Display

Program Edit Mode
Differences Between Regular and Advanced User Type
7-2
To enter Program Edit Mode, rst press the Program Mode button to enter Program Mode,
then press the EDIT soft button.
Once you are in Program Edit Mode, press the soft buttons at the bottom of the screen to
navigate to each of the Program Edit Mode pages. See the following sections for details on
navigating and changing parameters.
All parameters apply only to the currently selected Program.
Differences Between Regular and Advanced User
Type
When the Global Mode User Type parameter is set to Regular, you can access a Program’s
parameter controller assignments, eects, arpeggiator, and common settings. When the
Global Mode User Type parameter is set to Advanced, you can access the Regular User Type
pages as well as additional VAST or KB3 pages. e User Type parameter can be selected in
Global Mode on the Global MAIN1 Page on page 12-2.
When User Type is set to Advanced, some editing functions can be accessed by pressing the
Favorite 1 button. is is indicated by a white “F1” appearing the top of the screen when the
editable parameter is selected.
Selecting Parameters
The Display
In Program Edit Mode, the top line of the display shows the current Mode and Page. Use the
cursor buttons to navigate to dierent rows and columns.
Soft button options for Program Edit mode
Current Page
Current Parameter