Kurzweil Forte - The LAYER Page; LAYER Page Parameters

Program Edit Mode
The LAYER Page
7-28
The LAYER Page
Press the LAYER soft button to call up the LAYER page. Here you’ll set a number of
parameters that aect the current layer’s keyboard range, attack and release characteristics,
and response to various controls.
LAYER Page Parameters
Parameter Range of Values Default
Low Key C -1 to G 9 C 0
High Key C -1 to G 9 C 8
Low Velocity ppp to fff ppp
High Velocity ppp to fff fff
Enable Low ± 127 64
Bend Off, Key, All All
Trigger Normal, Reversed, Pedal
Down, Pedal Up
Normal
Sustain Pedal Off, On, On2, On3 On
Freeze Pedal Off, On On
Ignore Release Off, On Off
Hold Through Attack Off, On Off
Hold Until Decay Off, On Off
Delay Control Control Source list Off
Minimum Delay 0 to 25 seconds 0
Maximum Delay 0 to 25 seconds 0
Enable Control Source list On
Enable Sense Normal, Reversed Normal
Enable High ± 127 127
Opaque Off, On Off
Sostenuto Pedal Off, On On