Program Mode
Save User Programs
6-20
To save the changes you’ve made, press the Save button once to display the Save Dialog.
e display shows the rst available ID number and the current Program name. You can
save Programs with ID numbers from 1024 to 2047. If you are saving a Program that has
not been previously edited, the next available unused ID number will be selected. If you are
saving a previously edited User Program, the ID number that the Program was last saved
with will be selected. Press the Value Jump double button press (Previous + Next) to toggle
between selecting the ID number that the Program was last saved with and the next available
unused ID number. When viewing the Save Dialog, you can quickly save the Program to the
displayed ID number by pressing the Save button again.
Changing ID Numbers
To change the ID number, turn the Alpha Wheel or use the Previous/Next buttons to select
the new ID number. e label underneath indicates if it is an “Unused ID”. You can also use
the keypad function of the Category buttons to type an ID number, followed by pressing the
Enter button.
To Next Page
Loading...
