Global Mode
MAIN2 Page
12-6
Audio Out S/M
e audio outputs are normally used as a stereo pair; however, on occasion the Forte might
be operated in Mono mode by plugging an audio jack into the Left A Audio Output. Setting
this parameter to Auto allows the Forte to detect the audio connections and adjust to mono
output if required. e parameter can be set to Stereo, to force the Forte to output a stereo
signal always and ignore the audio output detection. By default this parameter is set to Auto.
Multi Controllers
When a multi is selected, this parameter determines how the sliders respond to movement.
When set to instant, moving a slider will result in the assigned parameter immediately
jumping to the slider position. With some parameters an abrupt change to the sound may
be undesirable. In this case set this parameter to PassEntry and the slider will only become
active when the slider is moved past the Multi Entry Value. is results in smooth changes to
the sound.
MAIN2 Page
e MAIN2 page in Global Mode allows you to set up the feel and response of the Forte
keyboard to your playing style, the intonation key of music, as well as how pianos and
drums respond.
Parameter Range of Values Default Value
Velocity Map
Linear, Light1, Light2, Light3, Hard1, Hard2, Hard3,
PianoTouch, Easy Touch, GM Receive
Linear
Key Velocity Map list -50 - +50 0 None
Pressure Map Easiest, Easier, Easy, Linear, Hard, Harder, Hardest Linear
Press S Override
None, 0% - 300%
None
To Next Page
Loading...
