Kurzweil Forte - Globals; Lower Transpose (Xpose); Upper Transpose (Xpose); KB3 Editor: the Drawbars (DRAWBAR) Page; Drawbars Parameters

Program Edit Mode
KB3 Editor: The Drawbars (DRAWBAR) Page
7-87
Globals
e Globals parameter aects LFO2, ASR2, and FUNs 2 and 4. When Globals is set to
O, these four control sources are local; they aect each pair of tone wheels individually.
ey begin operating each time a tone wheel is turned on. When Globals is set to On, these
control sources become global, and they aect every tone wheel of the current program
simultaneously. Since all tone wheels are turned on nearly simultaneously when a program is
selected, you typically will not notice a dierence between having Globals set to On or O.
In some cases, it may be possible to hear dierences in the modulation of each pair of tone
wheels when using these control sources with Globals set to O.
Lower Transpose (Xpose) / Upper Transpose (Xpose)
ese two parameters let you transpose the upper and/or lower tone wheels in semitone steps
away from their default tunings.
KB3 Editor: The Drawbars (DRAWBAR) Page
Press the Drawbr soft button to view the DRAWBAR Page. is page lets you edit KB3’s
drawbars.
Drawbars Parameters
Steps
is parameter lets you specify the increments by which drawbar volumes will change.
Choose either 0–8, to approximate the drawbar settings on actual organs, or choose 0–127
for a ner degree of resolution.