Program Mode
The Split and Layer Soft Buttons
6-14
Simply hit the Split button, and the Forte automatically creates a Multi with two active
Zones. e Program you were using in Program Mode is used in the right hand of the Split
as the Program for Zone 1. After this you can choose a “Split Program” that will be used in
the left hand of the Split as the Program for Zone 2. e Default split program is 245 Finger
Bass.
Once you have saved your Split as a Multi, you can continue to add Split or Layer Zones to
the Multi until you reach the number of Zones allowed. e Forte will display a message if
you have already reached the maximum active Zones.
To Next Page
Loading...
